Technical Bulletins

A two-part silicone potting and encapsulating resin designed for the protection of electronic devices.

Provides a thin, smooth, adherent, flexible film of high electrical conductiv­ity that can be applied on a variety of substrates, including plastics, paper, wood, textiles, glass, ceramics, and metals.  Suitable for PCB design and repair, mark sensing e.g., on recording tapes, screening plastic housings against high frequency fields, earthing strips, connections to non-solderable surfaces, electroplating pre-coats, contact surfaces, potentiometer tracks, etc.

A non-melting grease that will not migrate from vertical contacts or surfaces and will provide greater protection from atmospheric conditions than an oil. 

SGB (2GX Grease) was developed as an extension of the No 2 range (SGA and SOA) with increased plastic compatibility that will significantly increase contact performance and lifetime.

The 2X range of lubricants was developed as an extension of the No. 2 Range (SFA, SGA, and SOA) with increased plastic com­patibility that offers a harder consistency.

A quick drying, mildly activated, no-clean flux in aerosol form for use when removing and replacing surface mount components. Recommended for precision products e.g., telecommunications or professional computers where a high degree of reliability is required.

A high quality lubricating oil, suitable for applications where a low viscosity product is required.

Developed as an extension of the No 2 Range (SGA and SOA) with increased plastic com­patibility. with increased contact performance and lifetime.

Is a synthetic grease offering outstanding low temperature perform­ance and excellent compatibility with thermoplastics, including ABS and Polycarbonate, even at elevated temperatures. 

Is a synthetic grease offering good low temperature perform­ance and excellent compatibility with thermoplastics, including ABS and Polycarbonate.

Is a non-flammable cleaning solvent designed for the removal of solder pastes and adhesives. SSS is water rinseable and suitable for use in automated stencil cleaning equipment.  

Removes both solder pastes and adhesives with high efficiency. The wipes are made from high wet strength fabric, pre-saturated with a formulated solvent based cleaner.