Technical Bulletins

Ideally suited for the removal of flux resides and many other cleaning applications that do not contain sensitive metals and substrates. Used for cleaning metals prior to plating operations to provide an extremely clean and slightly roughened surface, allowing excellent bonding of the plated material.

Removes all types of flux residues (RA, RMA, no-clean, and water-soluble) quickly and efficiently, using a range of different production equipment. It contains a corrosion inhibitor allowing the safe cleaning of all metals including aluminum, copper, and brass and has enhanced rinsability.

Removes all types of flux residues (RA, RMA, no-clean and water-soluble) quickly and efficiently, using a range of different production equipment. It is designed as a ready-to-use version of SWAF and also contains a corrosion inhibitor for use with sensitive metals.

Ideally suited for the removal of very stubborn flux resides and no-clean fluxes, which can be extremely difficult to remove. SWAS will remove them to military cleanliness standards.

Specially formulated blend of non-flammable solvents which forms a micro-emulsion when mixed with water. Designed for cleaning printed circuit boards, it is ideal for the safe removal of all types of paste, adhesive, and flux residues, including no-clean.

A powerful water-based cleaner that has been developed for the removal of solder pastes and surface mount adhesive from screens, stencils, boards, and accessories.  Designed for use in automated screen cleaning equipment.

Specially formulated to offer highly effective degreasing at a neutral pH, making it suitable for even the most sensitive of surfaces. Such applications may include cleaning during the manufacture of liquid crystal displays (LCD) and optical lenses. SWNP also contains a carefully selected corrosion inhibitor making it suitable for sensitive metals.

SYR are single-use syringes supplied with an end cap.

Is a single component, 100% solids, low odor silicone RTV which cures upon exposure to atmospheric moisture. It has been designed to fill the gap between the device and the heat sink, thus reducing the thermal resistance.

Is a specialist fluorinated polymer coating formulated to provide high levels of liquid repellence to printed circuit boards and other electronic devices.  Once dried, has a low film strength and is therefore easily removed by minimal friction, allowing assemblies to be coated without masking.

Is a high purity solvent blend designed for use with Electrolube acrylic-based conformal coatings.  Coatings suitable for use with UAT are HPA – High Performance Acrylic, APL – Acrylic Protective Lacquer and TRV – Tropicalised Varnish.

 Is a special blend of solvents for cleaning and the removal of many residues found in electro-mechanical applications.  It is highly recom­mended for cold cleaning applications in conjunction with all types of electro-mechanical equipment. and ideal for use in cleaning tanks as it has a low evaporation rate and high flashpoint.